Passer au contenu

On vous rappelle

Laissez votre numéro et le moment qui vous arrange : nous vous appelons pour parler de votre projet ou d'un luminaire.

Votre numéro sert uniquement à vous rappeler. Voir notre politique de confidentialité.

Panier

Votre panier est vide

Article : B22 or E27? UK Bulb Caps Explained

A close-up of a brass wall light holding a bare clear globe filament bulb, lit against a dark textured wall

B22 or E27? UK Bulb Caps Explained

B22 vs E27 comes down to how the bulb goes in. A B22 bulb, the British bayonet cap, has two small pins on its side: you push it in and twist. An E27 bulb, the Edison screw, has a threaded base 27 mm across that you screw in. The two are not interchangeable, so check the code on the old bulb or on the light's product page before you buy a new one.

Most British homes grew up with bayonet bulbs, which is why the question tends to come up the day a new light arrives. Many lights designed today take a screw cap instead. Here is how to read what you have, and what to buy.

How do you tell a B22 bulb from an E27 bulb?

Look at the metal end of the bulb, the part that sits in the lampholder. The code is usually printed on it, or on the box. If it has worn off, the shape gives it away. The letter names the type (B for bayonet, E for Edison) and the number is the diameter in millimetres.

Code Also called What the cap looks like How it goes in
B22 BC, bayonet cap A smooth metal sleeve 22 mm across, with a pin on each side and two contacts on the end Push in, then twist
E27 ES, Edison screw A threaded metal base 27 mm across Screw in
B15 SBC, small bayonet cap The same pins on a narrower 15 mm sleeve Push in, then twist
E14 SES, small Edison screw A threaded base 14 mm across Screw in

The lampholder tells the same story from the other side. A bayonet holder has two slots for the pins; a screw holder has a thread inside. If you are standing on a stepladder with the old bulb in your hand, a photo of its end on your phone saves a second trip to the shop. The smaller caps, E14, G9 and GU10, have their own guide: E14, G9 and GU10 explained.

Is E27 a screw or a bayonet?

A screw. The E stands for Edison, and every E cap is threaded. An E27 bulb will not go into a B22 holder, and a B22 bulb will not go into an E27 one.

You may also see "E26/E27" on a lampholder or a product page. E26 is the North American size, and the two are usually interchangeable, which is why some holders are marked for both. For a British home, buy bulbs marked E27: Electrical Safety First notes that E26 lamps fall outside the European safety standard for LED lamps. Our Pickering marble ceiling light is a case in point: an LED bulb comes with it, and its page explains that the E26/E27 socket then takes any standard E27 bulb.

Why do so many new lights take E27?

B22 is the standard bulb fitting in the UK and in many Commonwealth countries. In countries on 220 to 240 V mains, which takes in most of Europe, the most common screw caps are E27 and its small sister E14. That is the likeliest reason so many lights designed for more than one country take E27: the designer starts from the cap most of their buyers use.

It is the same at Lumbury. Every light in our range whose page names a large cap names E27, and none names B22. That sounds like a nuisance, but in practice it rarely is: most of them come with a bulb in the box, so the first one is already sorted, and the page for Burnham, our glass and wood ceiling light, describes E27 as a common cap that is easy to find.

Which Lumbury lights take an E27 bulb?

Among our pendant lights, most take E27. A few examples, in the words of their own pages:

  • Rye, the small hand-painted ceramic pendant, arrives with its E27 bulb in warm white (3,000 K), and the lampholder handles up to 60 W should you ever change it.
  • Harrow, the ribbed solid wood dome, comes with an E27 bulb, and any standard E27 bulb can replace it later. Its page says it is not dimmable, so keep it on an ordinary switch.
  • Hawkshead, the 50 cm rattan pendant, takes one E27 bulb, supplied as an LED.
  • Coniston, the layered white fabric shade, comes with an E27 LED bulb, its only light source.

Wall lights and lamps take E27 too: Lavenham, Hebden, Corbridge and Ledbury on the wall, and Uppingham, a small table lamp in glass and chrome-plated steel. On each of these pages the cap is named in the section headed "The light".

Can you use a B22 to E27 adapter?

Small adapters exist that turn a bayonet holder into a screw one. We would rather you did not rely on one. In 2021, two B22 to E27 adapters sold in the UK were recalled from the people who had bought them, each rated a serious electric shock risk because live parts could be reached (recall notice on GOV.UK).

Weight is the other point. An adapter adds its own length and weight to the bulb's, and Electrical Safety First points out that a lamp much heavier than the one it replaces can make some lights and lampholders less stable and less sure of their grip. An adapter also pushes the bulb lower than the designer intended, so it may show below the shade.

The simple answer is a bulb with the right cap. If your lampholder is E27, buy E27. If it is B22, buy B22. LED bulbs are made with bayonet caps as well as screw caps, so neither choice ties you to an old filament bulb.

A quick checklist before you buy a bulb

  • The cap: B22, E27 or one of the small caps, read off the old bulb or the product page.
  • The maximum wattage: printed on the lampholder or the product page. Never go above it.
  • Brightness in lumens: about 806 lm matches an old 60 W bulb. Our guide to how many lumens each room needs has the rest.
  • Colour in kelvin: around 2,700 K for a sitting room or bedroom, about 3,000 K in a kitchen or study, and one colour per room (2700K or 3000K?).
  • Dimming: only a bulb that says "dimmable", and only if the light itself can be dimmed (dimming LEDs without the flicker).
  • The markings: a properly made LED bulb shows the maker's name, the voltage and the wattage. Markings alone prove little, so buy from a shop or brand you know.

Quick questions

Is BC the same as B22?

Yes. BC (bayonet cap) and B22 name the same standard British bulb fitting.

Can I put an E27 bulb in a B22 light?

No. The base will not fit the holder. Change the bulb, not the holder: buy a bulb with the cap your light was made for.

Where do I find the cap of a Lumbury light?

In the section of the product page headed "The light", and sometimes again in the measurements at the bottom. A few pages for lights supplied with their bulb don't name the cap. If that leaves you unsure, write to us before you order.

For a one-page summary of caps, lumens and kelvins that you can keep in a kitchen drawer, download The Room-by-Room Lighting Guide. Its bulb page fits on a single sheet.

Read more

A close-up of a clear glass globe on a brass stem around a lit filament bulb, against a dark textured wall
Bulbs & Dimming

E14, G9 and GU10: A Guide to the Smaller Bulbs

G9, GU10 and E14 are the small caps behind many wall lights and spotlights. How to recognise each one, choose the LED version, check whether it dims, and change it without fuss.

Lire la suite
An oxblood-rendered house front with a black panelled front door and a black fluted outdoor wall light lit beside it, a clipped box in a pot, sunlight
Bathrooms & IP

IP Ratings for Lights: IP20, IP44 and IP65 in Plain English

How to read the two digits of an IP rating, where IP20, IP44, IP65 and IP67 lights belong, how to choose between a porch and an open wall, and what the code leaves out.

Lire la suite