Passer au contenu

On vous rappelle

Laissez votre numéro et le moment qui vous arrange : nous vous appelons pour parler de votre projet ou d'un luminaire.

Votre numéro sert uniquement à vous rappeler. Voir notre politique de confidentialité.

Panier

Votre panier est vide

Article : Lighting a High-Ceilinged Room Without Losing the Warmth

An oxblood Georgian landing with a lit wavy white glass pendant over a round mahogany hall table, staircase and sash window at blue hour

Lighting a High-Ceilinged Room Without Losing the Warmth

The best high ceiling lighting ideas share one aim: keep the light, and the warmth, down where you live. In a room of 3 m (about 9 ft 10 in) or more, that means a central light with a longer drop and a larger size, plus wall lights and lamps at eye level and below. Over a table, the drop is set from the table, so under a 3.2 m ceiling the bottom of the light sits roughly 1.5–1.7 m below the ceiling.

Why a tall room can feel cold after dark

By day, a tall Victorian or Georgian room feels generous. After dark, the same height can work against you. A light fixed close to a 3.2 m ceiling is a long way from the sofa, the table and the book in your hand, and a good share of what it gives can land on the upper walls and the cornice. The middle of the room is lit; the corners and the seats are not.

The answer is rarely a brighter bulb. It is bringing the light closer to the people: a longer drop for the central light, a fitting with enough presence to hold the space, and a second layer of light at the height you sit and stand.

How far should a pendant hang from a high ceiling?

It depends on what is underneath it.

Over a dining table

Measure from the table top, not from the ceiling. The bottom of the light should sit 60–90 cm (24–35 in) above the table, and most guides settle between 75 and 90 cm. Take 75–90 cm and a table about 75 cm high, and the bottom of the light ends up 1.50–1.65 m above the floor, whatever the height of the room. The taller the ceiling, the longer the drop you need to get there. The table itself is covered in our guide to pendant height above a dining table.

Where people walk

Away from a table there is no fixed drop. What matters is headroom: anything hanging where people walk needs 2.1 m (about 6 ft 11 in) of clear space beneath it. Within that limit, a lower light sits closer to you. Under a 3.2 m ceiling, it can drop as far as 1.1 m.

Ceiling height Over a 75 cm table: ceiling to bottom of the light Where people walk: longest drop that keeps 2.1 m clear
2.8 m (9 ft 2 in) 1.15–1.30 m 0.70 m
3.0 m (9 ft 10 in) 1.35–1.50 m 0.90 m
3.2 m (10 ft 6 in) 1.55–1.70 m 1.10 m
3.5 m (11 ft 6 in) 1.85–2.00 m 1.40 m

The table column uses the 75–90 cm gap. If your table is lower or higher than 75 cm, take the difference off or add it on.

Check the flex before you order

This is the step that catches people out. A pendant that looks right in a photograph of a modern room may not reach far enough down in a house built in 1880.

Work it out with three numbers. First, the distance you need from the ceiling to the bottom of the light, from the table above. Second, the height of the shade, which is on the product page. Third, the length of the flex, cable or rods, also on the page. Say you want the bottom of the light 1.6 m below the ceiling and the shade is 35 cm tall: you need about 1.25 m between the ceiling and the top of the shade.

Our own pages show how much this varies:

  • Castleton, alabaster discs spiralling round a gold frame, has an adjustable drop of up to 150 cm on the smallest versions and up to 400 cm on the largest, and its cable can be shortened on site.
  • Hathersage, three tiers of beige fabric, hangs on a 120 cm suspension that adjusts.
  • Southwold, a slim paper disc, has a 150 cm cord that adjusts to set the height.
  • Cartmel, a chandelier of rattan leaves on a black iron frame, doesn't give its drop on the page, so ask us before you order it for a tall room.

If a page doesn't make clear whether a figure includes the shade, email us and we'll check. A flex that is a little long is easy to deal with: several of our pendants have a flex that is shortened when the light is fitted, and their pages say so. One that is too short can't be stretched. Our fitting guide shows how the drop is set on the day.

Size up, within reason

Start with the room-size rule: total the length and width in feet, and that number in inches is your diameter; with a metric tape, the total in metres times 8.3 gives centimetres. A 4.5 × 4 m drawing room gives about 70 cm. The rule allows about 10% either way, and in a tall room, with more air around the light, the upper end, around 77 cm, is worth trying first. The full method, with more examples, is in what size ceiling light your room needs.

A light can also gain presence downwards rather than outwards. Castleton grows in both directions as you add discs: 20 cm wide with a single disc, 70 cm with 27, and longer as it widens. Its page puts the ceiling height first and the disc count second, which is the right order. Hathersage comes in 45, 58 or 70 cm across, standing 27.5, 35.5 or 42.5 cm tall, and its page puts the 70 cm in a room with a high ceiling. Its three layers of fabric keep the bulb out of sight.

Southwold works the other way: up to 100 cm across but only 12–18 cm deep, with its whole surface glowing evenly. In a sitting room, choose its warmest white, 3,000 K. Cartmel is sized by floor area on its page: Ø 80 cm for 10 to 18 m², Ø 100 cm for 16 to 25 m², Ø 120 cm from 22 m².

To judge any size before you buy, cut a circle of card to the diameter, or hang a box of a similar size on string at the height you plan. One evening with it tells you more than a photograph. Our larger pieces are gathered among our centrepiece lights.

Bring the warmth down to eye level

In a tall room, the second layer matters even more than usual. With the central light dimmed or switched off, these do the evening's work:

  • Wall lights at about eye level, roughly 1.5–1.8 m above the floor. Where there is a picture rail, they sit below it, at that same height. A pair either side of the chimney breast gives the room a centre. More in how high wall lights should be.
  • Lamps on side tables and consoles, so each seat has light at its own level.
  • One colour of light: around 2,700 K suits a sitting room. If one light has a built-in LED fixed at 3,000 K, match the other bulbs to it.
  • Separate switches, ideally dimmers, so the central light can come down while the lower layer stays on.

Tall walls can also take taller wall lights. Buxton stacks rough-edged plates of natural alabaster, lit from the back by warm white LEDs. The nine-plate version stands 78 cm tall, and the product page keeps the seven- and nine-plate versions for tall walls. It can't be dimmed, so give it its own switch.

A tall ceiling is often an old ceiling

Before a larger light goes up, check what it will hang from.

  • Ceiling roses. An original plaster rose is worth keeping. Fix the new light through to the timber above, not into the decorative plaster.
  • Lath and plaster. Many older ceilings are a thin coat of plaster held on timber laths. As a rule of thumb drawn from the wiring regulations (BS 7671), a pendant's fixing should carry at least 5 kg, and the light's weight should suit the ceiling. Fix anything substantial into a joist or a timber batten, and if the weight isn't on the product page, ask us. Our piece on lath-and-plaster ceilings goes further.
  • Listed homes. In England, Wales and Scotland, works that affect a listed building's character need listed building consent. Ask your local planning authority before you change historic plaster.
  • Working at height. Check that your stepladder reaches comfortably without over-reaching, and have someone to help with anything heavy. Castleton arrives for assembly; an electrician can assemble and connect it for you if you prefer.

Measure first

  1. The ceiling height, from the floor to the ceiling where the light will hang.
  2. The table height, if the light goes over a table.
  3. The room's length and width, for the diameter.
  4. The shade height and the flex length of the light you like.
  5. The headroom left beneath it wherever people walk: at least 2.1 m.

All of these numbers sit together in our free Room-by-Room Lighting Guide, which has a page on older British homes.

Read more

A cream Regency drawing room with a travertine flush ceiling light in the ceiling rose, a marble fireplace with a fire, a gilt mirror and two sash windows at blue hour
Sizes & Heights

Flush or Semi-Flush? How to Choose a Ceiling Light

A flush light sits against the ceiling, a semi-flush one hangs just below it. Here is how to choose: the headroom arithmetic, the rooms each suits, glare, cleaning and how to read the drop on a pro...

Lire la suite
A low-angle view of a Georgian bedroom ceiling with a plaster rose and deep cornice, a lit travertine flush ceiling light, plum-red walls, a mahogany wardrobe and a sash window at blue hour
Sizes & Heights

Lighting for Low Ceilings: What Works Under 2.4 Metres

Under a ceiling of 2.4 m or less, keep 2.1 m clear wherever people walk. Here is what fits above that line, where a pendant still works, and how wall lights and lamps can carry a low room.

Lire la suite