Passer au contenu

On vous rappelle

Laissez votre numéro et le moment qui vous arrange : nous vous appelons pour parler de votre projet ou d'un luminaire.

Votre numéro sert uniquement à vous rappeler. Voir notre politique de confidentialité.

Panier

Votre panier est vide

Article : Wall Lights Either Side of a Fireplace, Mirror, Bed or TV

A bottle-green Georgian sitting room with a marble fireplace and log fire under a gilt landscape, two marble disc wall lights lit either side of the chimney breast and oxblood velvet armchairs

Wall Lights Either Side of a Fireplace, Mirror, Bed or TV

For wall lights either side of a chimney breast, the spacing comes from the chimney breast itself, not from a fixed number. Find its centre line, set both lights the same distance from it, and fix them at the same height, usually between 1.5 and 1.8 m from the floor (roughly 4 ft 11 in–5 ft 11 in). The same three steps work for a pair beside a mirror, a bed, a television or a painting.

Three rules for any pair

One centre line. A pair is read as a frame around something. Measure the object, mark its middle on the wall, and work outwards from that line. If the object is off-centre on the wall, follow the object, not the wall.

One height. Both lights sit at exactly the same height. A difference of a centimetre or two shows at once on a symmetrical wall, so use a spirit level or a laser level rather than measuring each side from an uneven floor or skirting board.

Clear of the object. Each light needs room for its full width and depth, plus a little air, so the shade doesn't touch a frame, a curtain or the edge of the screen. Check the measurements on the product page, then draw them on the wall before you decide.

Where to put each pair

Pair beside Height Where to centre each light Watch for
Chimney breast 1.5–1.8 m from the floor On the breast either side of the mirror or painting, or in the middle of each alcove Picture rails, shelves in the alcoves
Mirror over a console 1.5–1.8 m from the floor Just outside each side of the frame Arms that reach towards the glass
Mirror over a basin Set by the bathroom zones Just outside each side of the mirror Distance from the bath or shower
Bed Use the book test Over each bedside table A switch you can reach lying down
Television 1.5–1.8 m from the floor Beside the screen, on the same wall Lights opposite the screen, which reflect in it
Painting Both lights at one height, within 1.5–1.8 m Just outside each side of the frame Reflections on glazed prints

Either side of a chimney breast

You have two choices, and both are right in their place.

On the breast itself

Lights on the face of the chimney breast frame the fireplace and whatever hangs above it. They suit a mirror or a painting over the mantelpiece, and they draw the eye to the hearth. They need enough width on the breast for the lights and the frame together, so measure it first. Bath is one to measure for. It is 22 cm across and 29 cm high: natural marble cut as a disc, a metal ring in matt gold, and an LED hidden at the back that lights the stone. A pair takes up little of the breast.

In the alcoves

Lights centred in each alcove light the corners of the room, which the central ceiling light often leaves dim. They suit alcoves with armchairs, a desk or bookshelves. Measure the alcove from the side of the breast to the side wall and fix each light in the middle of that width. If you have shelves, line the light up with a gap between shelves rather than letting the shelf cut through it.

For a tall wall, Buxton is made of rough-edged plates of natural alabaster with warm white LEDs hidden behind the stone. It comes with 1 to 9 plates, from 18 to 78 cm tall, and its product page suggests seven or nine for a tall wall, such as a living-room wall. At 13 cm wide, a pair of the taller versions frames a chimney breast without crowding it.

Either side of a mirror

Lights on both sides of a mirror light your face from both sides, so neither side falls into shadow. That is why a pair works better beside a mirror than a single light to one side.

Over a hall console, set them just outside the frame, at the usual height. Bibury puts a 15 cm globe of ribbed glass at the tip of a gold arm that curves round, 22.7 cm wide overall; its product page suggests clear glass for everyday light and the tinted glasses for accent light. Allow for the arm when you measure the clearance to the frame.

Over a basin, the bathroom rules come first. Within 0.6 m of the bath or shower tray, and up to 2.25 m high, the minimum is IPX4, and the manufacturer should also confirm that the light is suitable for that zone. Choose a light whose product page gives the IP rating and says where it can go. Our guide to bathroom lighting zones explains how to read your room.

Either side of a bed

Symmetry matters less than reading here. Centre each light over its bedside table, then set the height by the book test: sit up against the pillows with a book while someone moves the light until the page is bright and the bulb is hidden from you, then mark that spot. If the book test gives two different heights for two readers, choose one that works for both, or accept a small difference: by the bed, comfort counts for more than symmetry.

Lavenham carries its ceramic shade, painted by hand, on a jointed arm of solid brass, which lets you angle the light down onto the page. Its page says it can be dimmed with a compatible dimmer switch. Our guide to bedside wall lights covers reach and switches in detail.

Either side of a television

Lights on the same wall as the screen are much less likely to show up in it than lamps and lights on the wall facing it. The Health and Safety Executive's advice for computer screens is to arrange things so there is no glare or bright reflection, and the same sense applies to a television. Turn the screen off, sit on the sofa, switch the lights on, and look at the black glass: anything bright you see there will be there during the film too.

Keep the pair at the usual height, just clear of the screen's edges, and choose lights that hide their bulb.

Either side of a painting

A pair either side of a painting gives the wall balance, the same way a pair frames a fireplace. Set them just outside the frame, both at one height. If the painting is glazed, check for reflections from your usual chair. To light the painting itself rather than frame it, a light above it does the job better: Malton, a solid block of travertine whose light shines down the wall, has a 24 cm version that sits well above a painting. Our article on picture lights goes into lighting artwork.

The masking tape method

Ten minutes with tape and paper will settle the spacing better than any rule.

  1. Measure the object (chimney breast, mirror, headboard, screen or frame) and mark its centre line on the wall with a strip of masking tape.
  2. Cut two paper templates the size of the light you are considering, using the width and height from the product page.
  3. Tape them up at your chosen height, the same distance from the centre line. Check the height with a level, not by measuring from the floor on each side.
  4. Leave them up for a day. Look from the doorway, the sofa or the bed, in daylight and in the evening.
  5. Move them a few centimetres in or out until they look right, then write down two numbers: the height, and the distance from the centre line to the middle of each template.

Those two numbers are what an electrician needs. If there are no wall light points yet, this is new wiring. Under England's Part P, extra points on an existing circuit only need notifying in the space around a bath or shower, and all of it must still meet BS 7671. Wales has its own rules, which include kitchens. An electrician can do this for you if you prefer, and our fitting guide explains what is involved.

How far apart should wall lights be along a long wall?

For more than two lights in a row, down a hall or along a long sitting-room wall, space them evenly: divide the wall into equal sections, one per light, and put each light in the middle of its section. The end lights then sit half a gap in from each corner, and the row looks deliberate. For the height of every kind of wall light, see how high wall lights should be.

You will find pairs for every one of these walls in our wall lights. And if you are planning the whole room, the sitting-room page of The Room-by-Room Lighting Guide, our free guide, ends with this very measurement: the wall space either side of the chimney breast.

Read more

A low-angle view of a Georgian bedroom ceiling with a plaster rose and deep cornice, a lit travertine flush ceiling light, plum-red walls, a mahogany wardrobe and a sash window at blue hour
Sizes & Heights

Lighting for Low Ceilings: What Works Under 2.4 Metres

Under a ceiling of 2.4 m or less, keep 2.1 m clear wherever people walk. Here is what fits above that line, where a pendant still works, and how wall lights and lamps can carry a low room.

Lire la suite
A navy Regency hall with two travertine bar wall lights lit either side of a gilt seascape above a mahogany console, stone-flagged floor
Sizes & Heights

How High Should Wall Lights Be? Heights for Every Room

Most wall lights sit 1.5–1.8 m from the floor, around eye level. Here is the height for every room, with the exceptions: stairs, the bedside, the bathroom and the front door.

Lire la suite