Skip to content

We'll ring you back

Leave your number and a time that suits you: we'll call to talk through your project or a light.

We only use your number to call you back. See our privacy policy.

Basket

Your basket is empty

Article: Flush or Semi-Flush? How to Choose a Ceiling Light

A cream Regency drawing room with a travertine flush ceiling light in the ceiling rose, a marble fireplace with a fire, a gilt mirror and two sash windows at blue hour

Flush or Semi-Flush? How to Choose a Ceiling Light

A flush ceiling light sits directly against the ceiling. A semi-flush light hangs a short way below it, on a stem or rod, with a gap between the shade and the plaster. The flush vs semi-flush choice comes down mostly to headroom: take the light's drop off your ceiling height, and wherever people walk, 2.1 m (about 6 ft 11 in) at the very least should be left clear beneath it.

What is the difference between flush and semi-flush lighting?

Both are fixed to the ceiling rather than hung on a long flex, so neither swings and neither needs its height setting. The difference is that gap.

  • Flush: the body of the light touches the ceiling. It is often a bowl, disc or dome with a diffuser underneath. The light goes down and out into the room.
  • Semi-flush: the shade hangs a little way down, on a short stem or rod. Depending on the shade, some light can reach the ceiling through the gap, and the fitting looks more like a small pendant.

Flush is the quieter of the two and takes the least height. Semi-flush has more shape to it, at the cost of a few centimetres.

Start with your ceiling height

Measure from the floor to the ceiling at the exact spot where the light will go. In an older house, ceilings dip, and a beam lowers the headroom wherever it runs. Then take off the drop of the light you like. Where people walk underneath, at least 2.1 m should remain.

Ceiling height Most the light can drop (2.1 m kept clear) What fits, from our range
2.2 m (7 ft 3 in) 10 cm A slim flush light, such as Whitby at 6 cm deep
2.3 m (7 ft 7 in) 20 cm Flush, such as Hadleigh at 12–15 cm
2.4 m (7 ft 10 in) 30 cm Flush, or a short semi-flush such as Burnham at 21 cm
2.6 m (8 ft 6 in) 50 cm Either type, or a short pendant

A worked example: Burnham, a glass globe on a wooden stem and ceiling rose, is 21 cm high with its stem included. Under a 2.4 m ceiling it leaves 2.19 m beneath it. Under a 2.3 m ceiling it leaves 2.09 m, just short of the mark, so on a landing or in a hall at that height a flush light is the better choice. Over a dining table, where nobody walks underneath, the table sets the height instead. For rooms where every centimetre counts, see lighting for low ceilings.

Where each one works

Hall

A ceiling light just inside the front door lights the door, the post and whoever is on the step. A long hall needs a second one further along. Where the hall ceiling is modest, a flush light is the safe choice, and in a narrow hall, wall lights keep the space clear overhead. More in hallway lighting ideas.

Landing and stairs

On a stairwell, measure the headroom from the step directly below the light, not from the hall floor. That figure can be smaller than it looks from the bottom of the stairs. Shade the bulb so nobody is dazzled on the way down. Our staircase and landing guide covers the rest.

Bedroom

Here the question is less headroom than glare. A bare bulb overhead glares when you are lying down and looking up, so choose a diffuser that hides the source. On Hadleigh, rippled glass with a scalloped, gold-edged rim, you cannot pick out the light source: the whole surface glows the same. On Whitby, a small 1970s-style dome of amber or smoked glass, an opal acrylic disc at the very bottom spreads the LED's light. If you prefer a semi-flush light over the bed, look at photographs taken from below before you order, to see whether the bulb shows.

Kitchen

A kitchen wants even, general light at about 3,000 K, then light on the worktops, since a ceiling light behind you can put the worktop in your own shadow. Lights fixed under the wall cupboards, behind a pelmet, deal with that without glare. For the ceiling itself, Grasmere is a white metal light with a cloud-shaped outline that sits flat against the ceiling and, its page says, lights the whole room evenly. It comes 50, 60, 90 or 110 cm wide, in warm white, cool white, a three-mode version you change with the wall switch, or a dimmable version.

Glare, and light on the ceiling

Glare comes from seeing a bright source directly. A diffusing shade, glass or acrylic, spreads the same light over a larger surface, which is easier on the eyes.

The ceiling is the other thing to watch. A flush light puts everything below the ceiling line, so the plaster around it can look darker than the room. A semi-flush light with a gap above the shade lets some light up there, depending on its shape, which takes away that dark lid over the room. In a low room, this matters more than in a tall one.

Brightness differs too, so read the figures. Bakewell, a flat light whose metal frame imitates walnut over a broad translucent white disc, gives between 1,800 and 3,600 lumens depending on size, in 3,000 K warm white. Even the smallest gives more than the old 100 W bulb, which matched about 1,521 lumens.

How to read the drop on a product page

Product pages describe size in a few different ways. Here is what to look for:

  • Ø (diameter): the width across. It tells you how the light fills the room, not how far it drops. Our guide to what size ceiling light you need covers that.
  • Height, depth or drop: the figure to take off your ceiling height. Burnham gives 21 cm, stem included. Whitby gives Ø 20 cm by 6 cm deep. Hadleigh drops 12 cm at Ø 20 and 30 cm, 13 cm at Ø 40 cm and 15 cm at Ø 50 cm.
  • No depth given: Grasmere's page says it fixes flat to the ceiling and Bakewell's that it fits flush, but neither gives a depth. If you are working to the last centimetre, email us before you order.
  • Weight: stone ceiling lights can weigh several kilos. Fix the mounting plate into a joist or noggin, and have someone hold the light while it is connected. Our fitting guide has a page on flush and semi-flush lights.

Cleaning and bulbs

Switch the light off and let it cool before you clean it, and never spray anything directly onto it. A closed flush bowl can collect dust and the odd insect, so it may need taking down now and then. If the glass comes off, wash it by hand in warm soapy water, never in the dishwasher, and dry it completely before refitting. A semi-flush light gathers dust on top of the shade and along the stem, where a soft brush does the job without taking anything apart.

Think about the bulb, too. Burnham comes with an E27 LED bulb, a common cap that is easy to find. Bakewell, Grasmere, Hadleigh and Whitby have built-in LEDs, so there is no bulb to change. Bakewell's LED module is given a life of about 50,000 hours.

Three questions to decide

  1. Does at least 2.1 m remain under it where people walk? If not, go flush.
  2. Will you look up at it, from a bed or a chair? Choose a diffuser that hides the source.
  3. How big is the room? Size the diameter to the room, then check the drop again.

You'll find our flush and semi-flush lights in our ceiling lights collection. For the headroom, sizing and colour figures on one page, download our free Room-by-Room Lighting Guide.

Read more

A deep teal-green Georgian sitting room, a lit travertine table lamp with a clear glass dome on a mahogany chest beside books and a carriage clock, sash window at blue hour
Sizes & Heights

Table Lamp and Bedside Lamp Heights: The Numbers That Matter

There is no single correct bedside lamp height, but there is one rule: the light sits below your eyes and never shines into them. Here are the three measurements that tell you which lamp suits your...

Read more
An oxblood Georgian landing with a lit wavy white glass pendant over a round mahogany hall table, staircase and sash window at blue hour
Sizes & Heights

Lighting a High-Ceilinged Room Without Losing the Warmth

Tall Victorian and Georgian rooms need a longer drop, a larger light and a second layer lower down. Here is the arithmetic for the drop, and how to check the flex before you order.

Read more