
Edwardian and 1930s Homes: Lighting With an Art Deco Touch
Art Deco wall lights suit Edwardian and 1930s houses for a simple reason: both belong to the years when electric light arrived in British homes. Look for geometric or sculpted shapes, glass that glows (opal, frosted, fluted or coloured), and chrome or a gold finish, mounted in pairs roughly 1.5 to 1.8 m up the wall. In a 1930s semi, measure the ceiling before choosing anything that hangs.
When electric light came home
The Edwardian era is the reign of Edward VII, from 1901 to 1910. Most houses of that time were still built for gas. An article on Victorian lighting in The Building Conservation Directory notes that electric lighting only really emerged in homes after the First World War, and the Science Museum Group's figures show how quickly that changed: 6% of British homes were wired in 1919, and two thirds by the end of the 1930s. By the 1930s, the museum adds, new homes in towns and cities were being lit by electricity.
So an Edwardian house was usually wired after it was built, quite possibly in the very years Deco was in fashion, while a 1930s semi was often built with electric light from the start. Historic England notes that the developers who built semis between the wars worked in styles ranging from Tudorbethan and neo-Georgian to Art Deco and flat-roofed Modern. So a Deco-style fitting has a genuine link to both kinds of house, even one with a mock-Tudor front.
What makes a light look Art Deco
The V&A points out that "Art Deco" is a name coined in the 1960s. At the time the style was called Style Moderne, and it took its later name from the 1925 Paris exhibition of decorative and industrial arts. The museum describes it as a mix of sources rather than one style, with geometric forms working their way into every part of life. By the 1930s, its favourite materials included chromed steel, aluminium, mirror and coloured glass. Alongside it ran the plainer, more functional design of the Bauhaus, the German design school that ran from 1919 to 1933.
For a light fitting, that comes down to a few cues:
| The cue | What to look for | In our range |
|---|---|---|
| Sculpted, coloured glass | A shade that glows in the tint of its glass once switched on | Broadway, in six glass shades from ivory to ruby red |
| A geometric metal frame | A crisp outline in black or gold | Ledbury, its crystal cylinder held in an iron frame with Art Deco lines |
| Chrome and milky glass | Polished metal against opal glass | Uppingham, a table lamp with Bauhaus-inspired lines |
| Fluted or ribbed glass | Raised lines moulded into the glass, which break up the light and soften it | Bibury, a 15 cm fluted globe you can have clear or tinted |
Opal glass deserves a mention of its own: it hides the bulb and glows evenly, which suits the clean lines of the period. Our guides to opal glass and to fluted, ribbed and reeded glass go further.
The Edwardian house
Edwardian houses often share the tall ceilings, plaster roses and picture rails of their Victorian neighbours, so the same rules apply. Hang the light from the timber above the rose, never from the plaster. Over a dining table, the table sets the height: the bottom of the light sits 60 to 90 cm above it, so a tall room needs a long drop. Keep wall lights under the picture rail, somewhere between 1.5 and 1.8 m high.
The dining room is the natural place for a Deco pair. Broadway is a wall light with Art Deco lines whose sculpted glass shade recalls the interiors of the 1920s, and its page suggests a dining-room or study wall. Switched on, the whole shade glows in the tint of the glass you chose. Ivory and opal white stay discreet, powder pink and amber add warmth, and smoked olive and ruby red make a bold, very 1920s note. Its E14 bulb is in the box. Dimming it takes two things, a dimmable bulb and a dimmer switch that suits it, and it belongs in the dry rooms of the house.
The 1930s semi
Start with a tape measure. Walk through the house: the bay-fronted front room, the hall and stairs, the back room (or one long room, if the two have been knocked together) and the kitchen. Measure the ceiling height in each. Under about 2.4 m, flush and semi-flush ceiling lights do better than pendants, and wall lights and lamps do the rest. And over any route people walk, a hanging light needs its lowest point at 2.1 m (6 ft 11 in) or higher. If you are weighing up the options, read our low-ceiling guide and flush versus semi-flush ceiling lights.
The front room and the bay
In the front room, matching wall lights flanking the chimney breast give the room its evening light. Ledbury breaks the light into small reflections on the wall, and sometimes up to the ceiling. You choose which way the cylinder faces when you fix it: upwards to send the flecks onto the ceiling, downwards to keep them on the wall. Its frame comes in satin gold or matt black, and it can't be dimmed, so it suits a pair that simply switches on with the room.
In the bay, a lamp stops the window turning into a dark rectangle after nightfall. Uppingham, a table lamp, does this neatly: milky opal glass, 18 cm across, rests on a clear glass column rising from a base of mirror-polished chrome-plated steel, and the whole lamp stands 36 cm high. Its page names a window recess among the places it fits, along with a narrow console or a sideboard. A small chain switches it on.
The hall and the kitchen
In the hall, put the first ceiling light close to the front door, use wall lights where the passage narrows, and light the stairs at both the top and the bottom.
A small kitchen with a modest ceiling needs a shallow light. Whitby is a small flat ceiling light, 20 cm across and only 6 cm deep, with tinted glass in amber or smoke and a painted metal band. To be clear, its styling is inspired by the 1970s rather than the 1930s, but its depth makes it a practical choice under a low ceiling. Its page pictures it in a small kitchen, a study or a utility room. You change its colour of light from the ordinary wall switch, warm, then neutral, then cool, but it doesn't work with a dimmer.
Chrome, brass or gold?
Chromed steel was one of the favourite materials of the 1930s, so chrome is a natural choice in a semi of that decade. A gold finish is warmer, and sits well with wood furniture and brass door handles. Whichever you pick, look at the other metals already in the room, such as door handles, switch plates and picture frames, and keep to one or two finishes so the room reads as a whole. Bibury's arm, for example, stays gold whichever of its seven glass colours you choose.
Keep the light warm, about 2,700 K for the living spaces and bedrooms, with a single colour temperature in each room. Browse our wall lights with these cues in mind.
Before you order, hold a piece of card the size of the light against the wall at 1.6 m, step back to the doorway and look. Our free Room-by-Room Lighting Guide gathers every height and size on a few pages, to download and keep.


















