Skip to content

We'll ring you back

Leave your number and a time that suits you: we'll call to talk through your project or a light.

We only use your number to call you back. See our privacy policy.

Basket

Your basket is empty

Article: Fluted, Ribbed and Reeded Glass Lights

A deep plum Georgian landing with two shell-shaped glass wall lights lit either side of a gilt landscape above a mahogany chest, staircase to the side, evening

Fluted, Ribbed and Reeded Glass Lights

A fluted glass wall light has vertical grooves or ridges in its glass, and those ridges bend the light as it passes through. The result is softer than clear glass, livelier than frosted glass, and the bulb shows only as a blurred glow. Choose clear fluted glass for useful everyday light, and tinted glass when you want colour and atmosphere more than brightness.

Fluted, ribbed or reeded: is there a difference?

Strictly, yes. Britannica defines fluting as a regular series of concave grooves and reeding as the opposite, a run of convex ridges. Both come from architecture: think of the channels running up a classical column.

In lighting, the words are used loosely. "Ribbed" often describes raised ridges, "reeded" narrow ones set close together, and "fluted" almost anything with vertical lines. The names on a product page won't always follow the dictionary, so look at the close-up photos and read the description. What matters at home is the effect, and the effect is much the same: a surface made of many small curves, each bending the light a little differently.

What do the ridges do to the light?

Each rib works like a very thin lens. Light changes direction when it passes from glass to air at a curved surface, so a ridged shade breaks the image of the bulb into a column of stretched strips. Three things follow.

They soften the light

You no longer see one bright point. You see a glow spread across the height of the glass, which is easier on the eyes when a wall light sits close to eye level.

They add sparkle

The edges of the ribs pick up fine lines of brightness. Smooth frosted glass spreads light evenly and stays quiet; ribbed glass keeps a little movement, even in daylight when the light is off.

They partly hide the bulb

Only partly. Clear ribbed glass blurs the bulb, but you can still tell where it is. If you want no bulb visible at all, from any angle, opal or frosted glass does that job better. Our guide to opal glass and its soft, even glow explains the difference.

Glass What you see when it is lit Light given Where it works well
Clear, smooth The bulb itself The most Where the bulb is meant to be seen
Clear, ribbed or fluted A blurred bulb and lines of sparkle High Halls, landings, a study, everyday light
Tinted, ribbed (amber, smoke, coloured) A coloured glow Lower Accent light and evening rooms
Opal or frosted An even glow, no bulb Softer and even Over a table, in a bedroom

Why ridged glass suits older British homes

Ridged glass looks most at home in houses of the 1920s and 1930s, the years of Art Deco, and it sits comfortably in an Edwardian home too. The V&A describes Art Deco as a style that "drew on timeworn traditions" while celebrating the mechanised modern world, and lists chromed steel, mirror and coloured glass among the favoured materials of the 1930s. Glass with strong vertical lines and a gold or brass-look metal sits easily alongside original picture rails, panelled doors and tiled hearths.

It works in a Victorian terrace too, as long as you keep the shapes simple. Curved arms and round globes look traditional; a tall fluted cylinder looks more modern. For more on the period, see lighting an Edwardian or 1930s home with an Art Deco touch.

Four fluted and ribbed glass lights, and what each one is for

Bibury is a 15 cm globe of fluted glass at the tip of a curving arm in iron with a gold finish. It takes an E14 LED bulb, included, which shines in every direction, and you choose from seven glasses: amber, coffee, smoke grey, red, rose red, blue or clear. Clear gives the brightest result; the tinted glasses are better for accent light. It suits an entrance hall, a landing or a study. Bibury cannot be dimmed, so it runs from the wall switch.

Bampton is a round wall light in fluted blown glass, 24 cm across and about 12 cm deep, in amber, white or grey. It arrives with its bulb and suits a room of around 5 to 10 m². Amber goes with wood and warm tones; white and grey with plainer rooms. In a bedroom, two of them can frame the bed.

Blakeney is a pendant made of two nested glasses: a cup with vertical ribs inside a smooth globe that is open underneath. You see the ribs through a smooth outer surface, which gives a layered look. It comes in clear or amber, in 15, 20 or 25 cm, with an E27 LED bulb included in either fixed warm white or three colour modes you step through with the wall switch. The 120 cm cord adjusts, and it is for dry indoor rooms only (IP20).

Burford is a table lamp. Its ribbed globe is glass tinted the colour of cognac, and it rests on a carved foot of solid wood with a walnut-coloured stain. Its LED module gives 3000 K warm white and is sealed in, so it cannot be replaced. It comes in two heights, 25 cm and 33 cm, and simply plugs into a socket, with a switch on its 150 cm lead.

You'll find more shapes and colours among our glass lights.

Clear or tinted: how to choose

Ask what the light has to do. If it is the main light on a landing or in a hall, clear fluted glass gives the most light and still softens the bulb. If the room already has a ceiling light or lamps, a tinted glass can afford to give less light and more colour: amber warms a room in the evening, smoke grey keeps things muted, red and blue become a feature in their own right.

The bulb matters more behind ribbed glass than behind opal. If you ever change it, a frosted LED bulb gives a calmer glow through the ribs, while a clear filament-style bulb gives sharper sparkle. Match the colour of light to the rest of the room: our guide's figures are about 2,700 K for sitting rooms and bedrooms and 3,000 K or so for kitchens and studies. Bibury uses a small E14 cap; our guide to E14, G9 and GU10 bulbs explains what to look for.

Measure first: a pair on a 1930s landing

Say you have a semi from the 1930s with a landing wall about 2.5 m wide and a ceiling around 2.4 m high. A pair of fluted globes either side of a window or a picture works well here.

  • Mark the height: 1.5 to 1.8 m from the landing floor, roughly eye level, so you aren't looking straight into a bulb.
  • Check that each position has a wall light point, or plan for one. On an English landing, a new wall light taken from an existing circuit doesn't need notifying, and the same goes for Wales, where the stricter rule covers kitchens, bathrooms and outdoor lights; Scotland and Northern Ireland have separate systems. An electrician can do this for you if you prefer; the checks to run first are listed in our fitting guide.
  • Look at the depth. On a narrow landing, a compact light such as Bampton, at about 12 cm deep, keeps the walkway clear.
  • Pick the glass with the room on: clear if the pair is the main light, amber or smoke if a ceiling light already does that job.

Keeping the ridges clean

Dust settles in the grooves, but ribbed glass is easy to clean. Switch the light off and let it cool first. If the glass comes off, give it a hand wash in warm water with a little washing-up liquid (never the dishwasher) and run a soft brush down each groove. Let it dry fully before it goes back on. Never spray anything straight onto a light. For every other material, from stone to rattan, read how to clean your lights, material by material.

Quick questions

Can I put a fluted glass wall light near a bath or shower?

In zones 1 and 2, only if the maker rates it at least IPX4 and confirms it suits that zone. Bibury and Bampton don't list an IP rating, so we'd keep them for the other rooms of the house.

Does ribbed glass make a light dimmer?

Clear ribbed glass changes how the light looks more than how much of it there is. Tinted glass is what holds more of it back, which is why Bibury's page steers you to clear glass for day-to-day use and keeps the coloured ones for accents.

For heights, bulbs and colours room by room, keep The Room-by-Room Lighting Guide to hand while you choose.

Read more

An oxblood limewashed study with a black metal hoop wall light with an opal globe lit above a desk, sunlight across the wall
Materials

How to Clean Your Lights, Material by Material

Glass washes in the sink; stone wants no acids and very little water; alabaster none at all. A material-by-material guide to cleaning your lights safely.

Read more
An oxblood limewashed kitchen with three blue-and-white ceramic pendants lit over a kitchen island, sunlight on the wall
Materials

Ceramic and Hand-Painted Lights

Ceramic is opaque, so a ceramic shade sends its light down in a pool and stays a decorative object when it is off. How glazes and hand-painting work, where ceramic lights suit, and how to care for ...

Read more